Error Code List - Sony LIB-D81 Product Description Manual

A.10. Error Code List
When the AIT autoloader generates an error, an error code appears on the
message display. The following is the list of error codes that can appear on the
message display. If a message from the list appears on the message display,
contact customer service.
If an error code appears on the message display that does not figure in this list,
before contacting customer service verify the LED on the front of the AIT
autoloader, as well as perform the operations outlined in "Other Messages"
(page 151)
If the problem persists, contact customer service.
Error code Description
No valid error code
00
information.
Detected a microcode
01
anomaly upon startup.
Detected a base RAM
02
anomaly upon startup.
Detected a buffer RAM
03 anomaly upon startup.
The Identify message
20 detected a SCSI parity error
after selection.
Detected SCSI parity error.
21 Message Out phase retried
but gave up.
Detected SCSI parity error.
22 Command phase retried but
gave up.
Detected SCSI parity error.
23 Data Out phase retried but
gave up.
Detected a parity error
24 message. Message In phase
retried but gave up.
Received Initiator detected
25 error message. Message
phase retried but gave up.
Received Initiator detected
26 error message. Command
phase retried but gave up.
Received Initiator detected
27 error message. Status phase
retried but gave up.
Received Initiator detected
28 error message. Data In phase
retried but gave up.
Received Initiator detected
29 error message. Data Out
phase retried but gave up.
Received an illegal message
2A
from the SCSI interface.
Received an illegal Identify
2B
message at the SCSI interface
Display
—
[0 1] appears on the
message display.
[0 2] appears on the
message display.
[L ] and [0 3] appear
alternately on the message
display.
—
—
—
—
—
—
—
—
—
—
—
—
Appendix
Logged
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
147