Treatments" Menu; Programming" Menu - Globus GENESY 1500 User Manual

"Treatments" menu

The "Treatments" menu (Stim lock) enables the user to lock the device. If the device
is blocked, the user can only perform the programs stored thanks to the "Add to"
function in the screen prior to the program execution.
The function has been conceived when the units has to be used by beginners or
patients who have to perform the programs specifically chosen by a specialist.
Activation of the STIM LOCK function
Press and hold Fn and  (RIGHT button) for at least 3 seconds until the area where
the treatments have been saved appears. When activating the STIM LOCK function,
the units works with limited functions.
Deactivation of the STIM LOCK function
Press and hold Fn and  (LEFT button) for at least 3 seconds until the main menu
appears.
NOTE: If the main menu does not appear, when the unit has been turned on, verify
that the Stim lock function is not activated.
Try to deactivate it.
If the problem persists, contact the customer care.

"Programming" menu

The Electrostimulator offers the possibility of creating new programs and modifying
the existing ones, which renders the device highly flexible and suitable to all
requirements.
By selecting the "Programming" entry, it is possible to create new programs (when
the message EMPTY appears) and to execute customized programs. These
programs can be modified at any time (see the section "How to modify a program"
below).
The programs created with this function are the same for all USERS and cannot be
stored in the "Last 10" menu nor in the "Favorites" menu.
How to create a new program
Use the P+ and P- buttons to select a number (from 1 to 5 in Genesy 300 and from 1
to 15 in Genesy 600) for the program you wish to create and confirm with OK.
Program name insertion
Use the LEFT and RIGHT buttons to select the letters and to confirm the name of the
new program with OK. To delete a letter, move the cursor on "Delete". After
inserting the program name, select "Continue".
25
Rev.05.15