Favorites" Menu - Globus GENESY 1500 User Manual

Automatic function (AUTO STIM) Available only for EMS and TENS
currents
The AUTO STIM function enables the user to execute a program automatically, i.e.
without having to regulate the intensity. Intensity values are automatically set to the
levels used during the last execution of the same program. The AUTO STIM function
can be used only for programs listed among the "Last 10" memory.
Notes:
- To execute a program in AUTO STIM mode, it is necessary to apply the electrodes
of each channel on the same position and muscular group (or body part) chosen
for the previous execution of the same program. In fact, intensity values are specific
to each channel.
- When using AUTO STIM mode, each user must access the electrostimulator with a
personal user code (USER).
It is possible to exit AUTO STIM mode by pressing any increase button.
b. If placing the cursor on "Electrode placement", a brief guide for the
correct placement of the electrodes is displayed.
For further information on the electrode placement, see the picture included in the
end of this manual.
c. Placing the cursor on "Delete from the list", the selected program will be no longer
present in the "Last 10 executed programs" area.
The "Last 10" programs memory refers to a specific user. Thanks to the USER
SELECTION (multi-user) function, different users (up to 10, plus default user, defined
as USER 0, in Genesy 600 and up to 3 in Genesy 300) can have their own "Last 10"
memory

"Favorites" menu

This menu enables the user to save the 15 most used programs in a specific
memory. To save a program, choose the program you want to save from the
"Program List" menu. Before execution, select "Save in Favorites" and confirm with
OK. The selected programs can be easily executed from the "Favorites" menu.
NOTE: In Mode 2+2, it is not possible to store favorite programs.
24
Rev.05.15