Alarms; Compliance; Warnings And Contraindications; Mandatory Behavior - Globus GENESY 1500 User Manual

ALARMS

Compliance

Certifications: CE MDD certificate.
The sound and acoustic signals are in compliance with directive 60601-1-8.
Meaning of the "Electrode error" alarm
If one or more cables are not connected to the mains, or if microcurrents cables are
used to an EMS program, the message "Electrode error" will appear on the display.

WARNINGS AND CONTRAINDICATIONS

Mandatory behavior

For safety reasons, the device must be used exclusively as indicated in the present
manual.
Do not perform the treatment in case of skin lesions.
If the package, the cable or the charger connector show signs of wear or damage,
replace them instantly.
The unit has to be connected to the mains by its power supply unit. Before starting
the treatment, ensure that the building wires comply with the directives in force in
your country. Ensure that the power supply unit is in a comfortable position and can
be easily unplugged.
The producer declines all responsibility relating to any misuse or mishandling of the
device.
Electronic or manual reproduction of part or all of the contents of the present
handbook is strictly forbidden without producer's prior permission.

Warnings before use

Do not use Genesy 1500 combined with other electronic devices, especially if they
maintain vital functions. Read the tables at the end of the present manual for a
correct use of GENESY. If the device is used nearby or on other electromedical
equipment, ensure that GENESY works properly.
- Read the present manual carefully before using the device. Keep the present
manual in a safe place;
- The current emitted by the device is higher than 10mArms.
- Checking the integrity of the device before each use is a fundamental
requirement to perform the therapy correctly. The device must not be used if the
buttons or cables are defective or malfunctioning.
The device:
- has to be used for neuromuscular stimulation only and as described in this manual;
Rev.05.15
16