Table of Contents
Advertisement
"PROGRAMMING" MENU
PROGRAMMING MENU
The Electrostimulator offers the possibility of creating new programs and modifying existing ones.
This makes the PRO models highly flexible and adaptable to all users' requirements.
From the "Programming" entry of the main menu, it is possible to create a new program (when
the word EMPTY appears) and to execute already personalized programs. These programs can
be modified at any time (see the section "Modifying an existing program" below).
The programs created with this function are available for all users and cannot be memorized in
the "Last 10 Executed" list nor in the "Favorites" list.
Create a new program
From the main menu, move the cursor to "Programming" using the UP and DOWN keys and con-
firm with OK. Use the UP and DOWN keys to select a number (from 1 to 10) for the program you
wish to create and confirm with OK.
NOTE: If the program has already been created, see "Modifying an Existing Program" below.
To name the new program, use the LEFT and RIGHT keys to select letters and confirm with OK. To
delete a letter, move the cursor to highlight it and confirm with OK.
To set up parameters for the new program, use the UP and DOWN keys to select the desired
parameter and confirm with OK. In the event of an error, press the LEFT key for 2 seconds to return
to the previous display. The following parameters are set sequentially:
- Step 1. Type of stimulation. After inserting the name of the new program, use the UP and DOWN
keys to select the desired type of stimulation by choosing among: EMS, TENS, Microcurrents,
Denervated Muscles. The type of stimulation available depends on the model of electrostimula-
tor. Confirm with OK.
- Step 2. Number of phases. Use the UP and DOWN keys to select the total number of
phases. Confirm with OK.
- Step 3. Phase duration. Use the UP and DOWN keys to select the desired duration (in
minutes)) of the first phase. Confirm with OK.
Depending on the type of stimulation selected, you will now be prompted to set several para-
meters regarding the type of current. Use the UP and DOWN keys to select the desired para-
meter and confirm with OK until finished.
If the program is composed of multiple phases, after you have set up one phase you will auto-
matically be asked to set up the successive phase.
Modify an existing program
Within the "Programming" menu, select the number of the program that you wish to modify and
press simultaneously the UP and FUNCTION keys. At this point it is possible to modify the program,
beginning with its name and passing through steps 1, 2 and 3 above.
Eliminate a program
Within the "Programming" menu, select the number of the program that you wish to delete and
press simultaneously the DOWN and FUNCTION keys. It is not possible to recover a program once
it has been eliminated.
NOTE: It is not possible to set up mixed, multiphase programs
16
REV. 03.09.04
Hide quick links:
Advertisement
Table of Contents
