Connections; How To Connect The Cables - Globus GENESY 1500 User Manual

CONNECTIONS

Cable connection outlets and power supply
Attention:
If the package, the cable or the connector of the charger show signs of wear or
damage, replace them instantly.
Device
Power supply by electricity grid. Genesy 1500 can operate also connected to the
mains 230 V. To connect the power supply to the connector, plug it as shown
below.
To isolate the charger from the mains you have to disconnect it from the mains
outlet.

How to connect the cables

Plug the connectors in the slots in the upper part of the unit to connect the diffusers
to the device, (see pic.) When plugging in the cable, the grooves of the cable have
to be oriented downward. The inlets are placed exactly under the corresponding
channels.
10
Rev.05.15