Advanced" Menu - Globus GENESY 1500 User Manual

Parameters setting
STEP 1. Press P+ and P- to select the type of stimulation desired.
STEP 2. Press P+ and P- to select the number of phases of the program.
STEP 3. After setting the number of phases of the program, it is possible to select the
desired parameters on different screens. Press P+ or P- to select the parameters.
The procedure executed so far is the same for every type of program you wish to
create.
If the program presents more phases, the insertion of a phase is automatically
followed by the successive phase.
NOTE: The programmable types of stimulation vary according to the model.
How to modify or delete a program
In the "Programming" menu, it is possible to modify or delete the programs
previously stored.
Press and hold "fn" + P+" buttons to modify and "fn" + "P-" to delete.
NOTE: it is not possible to set mixed multi-phase programs. (e.g. EMS+TENS program).

"Advanced" menu

The advanced menu includes the following entries:
Mode 2+2
The device allows the execution of two different programs (Ems or Tens) at the same
time, thus permitting the simultaneous treatment of two patients or two muscular
groups.
How to set multiple treatments
There are two possibilities to execute two different programs simultaneously:
a. Selecting "2+2 Mode" from the advanced menu
b. From the "Program list" menu;
a) From the main menu, select "Advanced -- Mode 2+2" and confirm with OK.
Rev.05.15
Mode 2+2
User selection
Working time
Setup
Diagnostics
Turn off
26