Esc Dc4 N; Esc Sp N; Esc ! N - Bematech LR200M Programming Manual

ESC DC4 n

[Name] Disable Double Width mode
[Format] ASCII
Hex
Decimal
[Description] Disable Double Width mode

ESC SP n

[Name] Set right-side character spacing
[Format] ASCII
Hex
Decimal
[Range]
[Description] Sets the character spacing for the right side of the character to [n×0.125 mm (n×
0.0049")].
 The right-side character spacing for double-width mode is twice the normal value.
[Notes]
 This command does not affect the setting of Kanji characters.
 This command sets values independently in standard mode.
[Default] n = 0

ESC ! n

[Name] Select print mode(s)
[Format] ASCII
Hex
Decimal
0 n 255
[Range]
[Description] Selects print mode(s) using n as follows:
Bit Off/On
Off
0
On
Off
1
On
Off
2
On
ESC DC4 n
1B 14 n
27 20 n
ESC SP n
1B 20 n
27 32 n
0 n 255
When characters are enlarged, the right-side character spacing is n times normal
value.
ESC ! n
1B 21 n
27 33 n
Hex Decimal
00 0
01 1
00 0
02 2
00 0
04 4
Function
Character Font A (12×24).
Character Font C (9×17).
Reverse printing mode not selected
Reverse printing mode selected
Upside-down printing mode not selected
Upside-down printing mode selected
12
LR200M Programming Manual V1.0