PICOTE Small Grabber Value Operation & Safety Manual page 10

REPAIRING DAMAGED CABLE - JAW END
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
4. Use a wrench to remove the Jaw Head
5. Carefully cut the outer casing. Avoid cutting the wire inside. Cut at least 25mm (1") or until you
have no damaged wire left.
7. Pull the wire inside its casing—it should
6. Trim the wire.
measure at least the same length as the
trimmed outer casing.
14
10 Picote Solutions Oy Ltd www.picoteinstitute.com
10