MecPower Tecway Alien Fireman Manual page 3

1) The voltage range of the game should be 105V~115V or 215V~225V.
The proper voltage should be 110V/220V. The specific voltage accords
to the date plate on the back door of the game. The voltage must be
correct; otherwise it would be difficult to repair the damage.
2) The plug must be plugged in tightly and keep the power cords not be
too tight and damaged in order to prevent bodily injury, short-circuit
and power leakage.
To put the machine to normal operating, please properly adjust the
3)
coin match and the game settings when use at the first time.
Please regularly check all the functions of the game when operate to
4)
prevent dysfunction.
1) Be sure to check and maintain the game regularly.
2) Switch off the power before replacing the parts of the game.
3) The parts for replacement should be the same model as the old one.
4) Please check the connection and voltage output after replacing the
power supply.
5) The voltage range of the PCB should be 5.1V-5.4V.
Check whether the game has creepage and the voltage before
6)
repairing the PCB.
Notes of Usage
Notes of Maintenance
2