Telair ENERGY 4000B User's Operating Instruction And Installation Manual page 12

To power the fuel pump, proceed as follows:
• connect the negative pole of the pump to the
relevant connector inside the generating set
(Fig. 16 ref. 1);
• connect the positive pole of the pump to the
positive terminal of the battery (Fig. 5 ref. 3).
To perform the power connections, use a two-
pole cable with a cross-section of at least 1 mm
12
GB
.
2
11
12
Energy 4000 B / 4000 GAS
13
14
Vers. 013