General Precautions - CAME AGT A200K Installation Manual

CONTENTS OF THE KIT
AGT A200K
HA/200

General precautions

Read the instructions carefully before staring installation and perform all procedures as explained by the manufacturer.
•
The installation, programming, commissioning and maintenance of the product must only be carried out by technicians who are
•
qualifi ed and properly trained in compliance with the regulations in force, including as regards health and safety, and disposal of
packaging.
The installer must ensure that the information for the user, where there is any, is provided and delivered.
•
Before carrying out any cleaning or maintenance, disconnect the devices from the power supply.
•
The equipment must only be used for the purpose for which it was expressly designed.
•
The manufacturer declines all liability for any damage as a result of improper, incorrect or unreasonable use.
•
Only use soft, dry or slightly damp cloths to clean the device. Do not use any chemical products.
•
These instructions must be attached to the device.
•
This product complies with current applicable reference standards.
DISPOSAL - Dispose of the packaging and the device at the end of its life cycle responsibly, in compliance with the laws in force
in the country in which the product is used. The recyclable components are marked with a symbol and the material ID marker.
THE DATA AND INFORMATION IN THIS MANUAL MAY BE CHANGED AT ANY TIME AND WITHOUT NOTICE. THE MEASUREMENTS,
UNLESS OTHERWISE STATED, ARE IN MILLIMETRES.
A/200N
HBP HPC/1