Control Set-Up Menu 3 (Set-Up Of Delay Time) - Mitsubishi Electric VAR-6A User Manual

5.7 Control Set-up Menu 3 (Set-up of Delay Time)

How to set up delay time.
Control Set-up Menu END
Operation Mode.
,
Furthermore Control Set-up Menu
,
Then the following set-ups are possible.
＋ −
Control Set-up Menu
ENTER DISPLAY
＋ −
Delay Time
ENTER
＋ −
Control Set-up Menu
is displayed by pressing
3
is selected by pressing
3
Choose from Control Set-up Menu .
(Screen on the right is displayed)
Key
Set up Delay Time .
1 minute to 5 minutes to 10 minutes
Note 1. A setting step is 1 minute.
Note 2. Please set up the Delay Time interval complying with the electric discharge device of the capacitor.
When the illuminated state of the LED for power factor status display continues for a "Delay time", a signal for
Key
turning on/off the capacitor is output.
＜The example of a setting＞
Electric
Discharge
device
Electric discharge coil
Electric discharge resistance
Choose whether to complete the set-up refer
24 25
to page and about how to finish the
set-up or to continue other set-up.
Key
33
2
Key for
SET CONT.
＋ −
Key or Key.
* The present setting value is displayed.
Time
Delay Time
over 1 minute
over 5 minutes
* A changed setting value is displayed.
seconds in