Operation; Accessories; Maintenance; General Conditions Of Sales And Delivery - oventrop Regumat-180 Installation And Operating Instructions For The Specialised Installer

7 Operation

7.1 Bleeding the system
Before initial operation, the system must be filled and
bled with due consideration of the permissible
operating pressures.
7.2 Correction factors for mixtures of water and
glycol
The correction factors of the manufacturers of the
antifreeze liquids have to be considered when setting
the volume flow.

8 Accessories

Tailpipes sets are available for the connection to the
pipework.
The heating circuit controller "Regtronic RH" can be
directly connected to the station with the help of a
bracket.
A heat meter connection set G 3 ⁄ , 110 mm or G 1,
4
130 mm can be installed subsequently.
The complete range of accessories can be found in
the catalogue.

9 Maintenance

The boiler connection system is maintenance-free.
Tightness and function of the boiler connection system
and its connection points have to be checked
regularly during maintenance. The boiler connection
system must be easily accessible.
10 General conditions of
sales and delivery
The general terms and conditions of sales and delivery
valid at the time of supply are applicable.
28