Setting Password - YOODA SMART CONTROL UNIT Manual

To activate remote access service
choose 'Advanced' in 'Settings' tab.
After entering 'Remote access
service' again test activated function.
5. Configuration and work mode

5.8 Setting password

Run 'Remote access
service' option.
When controlling device is out of reach
of local Wi-Fi network control unit
search screen will be displayed.
To connect control device to
Smart Control unit press
'Connect remotely'.
To set password go into 'Settings',
and then choose 'Advanced'.
Choose 'Turned on' option to activate
remote access function.
When controlling device is again
within reach of local Wi-Fi network it
can be reconnected, by turning it off
using 'Settings' tab.
Choose 'Change Smart Control unit
access password'.