Remote Access Service - YOODA SMART CONTROL UNIT Manual

In Android system choose network
using 'Choose Wi-Fi network' button.
In iOS enter name of the network.
If the control panel has been wired
to a home network before, it must be
restarted (turn the power off and on)
after changing the wireless settings.
5. Configuration and work mode

5.7 Remote access service

Remote access service should be activated when automated devices are to be controlled outside from the local Wi-Fi
network. Reaction time of automated devices controlled using remote access, considering usage of staging servers, is
longer than when using local Wi-Fi network.
For remote access to work properly:
1. Smart Control unit needs to be connected to the internet.
2. Current time needs to be set on Smart Control unit.
3. Remote access service function needs to be activated.
Restart the Smart Control unit every time after you change network connection settings and test remote control service
again.
We choose the encryption method,
enter the password of the selected
network and click "OK".
After log in to the network, click "
Search SmartControl control unit."
Choose network encryption mode,
enter password and press 'OK'.
New IP address of Smart Control
unit will be shown. Press 'Connect'.