Setting Password - YOODA SMART CONTROL UNIT Manual

www.sukcesgroup.pl
In order to fully explore available functions of YOODA SMART CONTROL UNIT (YSC_UNIT) please take a moment and read this manual before using
the device.
All devices work on 433 MHz frequency.
5. Configuration and work mode

5.7 Setting password

Yooda SmartControl
My home
Devices
Devices groups
Network settings
Date, time
Advanced
To set password go into 'Settings',
and then choose 'Advanced'.
6. Controlling device form computer
Control unit, as well as the computer, must be connected to the same local Wi-Fi network.
To control roller shutters using computers web browser it's necessary to know IP address of the control unit in local Wi-Fi
network. We can check it in the mobile app.
YOODA SMART CONTROL UNIT
Yooda SmartControl
LAN
Connection to Smart Control Unit
My scenario Settings YOODA shop Smart Control Unit IP address
Remote access service
Remote access service state
About YOODA Smart Control Unit
Software version
current
newest
Mobile app version
Choose 'Change Smart Control unit
access password'.
Yooda SmartControl
My home My scenario Settings
Devices
Devices groups
Network connections
Date, time
Advanced
In 'Settings' tab choose 'Advanced'.
Advanced settings
Change Smart Control Unit access password
192.168.1.1
turned off
1.0,2/1.0.1
1.0,2/1.0.1
0.1.0
Close
Yooda SmartControl
LAN
Advanced settings
Change Smart Control Unit access password
Connection to Smart Control Unit
YOODA shop
Smart Control Unit IP address
Remote access service
Remote access service state
About YOODA Smart Control Unit
Software version
current
newest
Mobile app version
Close
Check control units IP address.
Yooda SmartControl
Zaawansowane ustawienia
Change Smart Control Unit access password
Connection to Smart Control Unit
Change Smart Control Unit access password
Smart Control Unit IP address 192.168.1.1
Old password (empty-no password)
Remote access service
Remote access service state New password (empty-no password) turned off
About YOODA Smart Control Unit
Repeat new password
Software version
current 1.0,2/1.0.1
newest 1.0,2/1.0.1
OK Cancel
Mobile app version 0.1.0
Close
Enter current password and new
password and accept it by pressing
'OK'.
192.168.1.1
turned off
1.0,3/1.0.3
1.0,3/1.0.3
1.2.3