Table of Contents
Advertisement
5. Configuration and work mode
5.3 Creating groups
In the 'Settings' tab press
'Devices groups'.
5. Configuration and work mode
5.4. Creating and activiting scenarios
By creating scenario user selects different devices already added to the app and chooses its action when scenario is beeing
run (e.g. roller shutter - close, TV - turn on, lights - turn off, etc.).
Scenario can be activated at any time manually or it can be started automatically, cyclically at a specific time, if it was
determined and switched to active. For scenario to work correctly, accurate date and time has to be set for the control
unit. Date can be set by choosing 'Date, time' in the 'Settings' tab.
To add new action click
'Add scenario' in the
'Sscenarios' tab.
Press 'Add devices group'.
Enter name of the scenario.
Specify name of the group, select preferred
image and add devices into the group.
Select 'Save' to save the settings
after configuration.
Activate scenario, then specify
By selecting random mode, the active scenario
the time of when
the event should work.
will run at random time within ± 15 minutes
of the set activation time.
Advertisement
Table of Contents
