Advertisement
Quick Links
www.sukcesgroup.pl
In order to fully explore available functions of CAMELEO series please take a moment and read this manual before using the device.
CAMELEO control units are compatible with all YOODA brand devices.
1. General information
Single-channel CAMELEO flush-mounted control unit (CAMELEO_1Cf)
Radio receiver range is a variable value and can differ from declared values depending on conditions in which device
operates. Possible sources of changes in range are building construction, interference caused by other radio transmitters
etc.
2. Detailed description
To access the programming button, remove the frame from the front of the control unit.
CAMELEO_1Cf
programming button
UP button
STOP button
DOWN button
Single-channel CAMELEO flush-mounted
1. Control:
can control single motor
2. Memory:
up to 20 transmitters
3. Range:
200 meters outdoor,
35 meters indoor
4. Power supply:
230 V / 50 Hz
5. Output voltage:
230 V / 50 Hz
6. Output power:
300 W
7. Dimensions:
80 x 80 x 50 mm
8. Operating temperature:
from 0°C to 50°C
9. Protection degree:
IP 30
control unit (front)
1
LED diode
Advertisement
Related Manuals for YOODA CAMELEO Series
Summary of Contents for YOODA CAMELEO Series
- Page 1 CAMELEO_1Cf www.sukcesgroup.pl In order to fully explore available functions of CAMELEO series please take a moment and read this manual before using the device. CAMELEO control units are compatible with all YOODA brand devices. 1. General information 1. Control: can control single motor 2.
- Page 2 3. Connection Optimal mounting parameters: 1. Minimal length from the ground > 1,5 m, 2. Minimal length from the wall and ceiling > 0,3 m, 3. Minimal length between receivers > 0,2 m. motor: 230 V / 50 Hz protective wire protective wire (power supply) (motor)
- Page 3 6. Deleting all transmitters Proceeding with this instruction will cause for all transmitters to be deleted form receivers memory. Programmed transmitters were successfully deleted. Switch Simultaneously press and hold The LED on the receiver will power on. STOP and DOWN button flash and then turn off.