YOODA SMART CONTROL UNIT Manual

www.sukcesgroup.pl
In order to fully explore available functions of YOODA SMART CONTROL UNIT (YSC_UNIT) please take a moment and read this manual before using
the device.
All devices work on 433 MHz frequency.
Table of contents
1. Safety rules
2. YSC unit description
2.1 Technical information
2.2 Construction
2.3 Working mode
3. First start-up
3.1. Initialisation
3.2. Downloading
app and changing language
3.3. Connecting to Wi-Fi
3.4. Connecting by Ethernet cable
1. Safety rules
1. Before connecting or starting control unit please read this manual.
2. Device needs to be connected to the internet according to specific parameters.
3. Control unit should not operate in places with high humidity (bathroom, sauna etc.).
4. Control unit should not be places next to sources of high temperature (radiator, fireplace, furnace etc.).
5. Control unit should not be placed within the reach of children.
6. Control unit should not be covered. It's recommended to leave at least 10 cm of free space over and on the sides of the
device.
7. Before cleaning or conservation control unit should be disconnected from power source. Unit is not water resistant
and should be protected from any liquids or any other potentially harmful substances.
8. Unit should not be opened. Do not attempt to repair the unit yourself - only manufacturer or authorized retailer can
perform any modifications or repairs.
9. Control unit should not be placed next to a strong magnetic field, as it can cause permanent damage to the device.
10. Control unit cannot be operated in explosive areas or where it is legally prohibited.
11. To protect the unit during a thunder storm power supply should be disconnected.
12. Control unit should not be connected to power supply that do not met all technical requirements.
13. Control unit should be protected from vibrations and shakes.
14. Control unit needs to be protected with a password - see point 2.3.
This symbol found on the apparatus indicates that the apparatus must be placed in a separate collection facility for
electronic waste and not disposed with household waste. Instead, it should be handed over to an applicable collection
point for the recycling of electrical and electronic equipment.
Allowing for specialized collection point to handle used device will allow for raw materials to be recycled and will have
positive impact on the natural environment.
YOODA SMART CONTROL UNIT
4. Mobile app - interface description
5. Configuration and work mode
5.1. Adding devices
5.2. Controlling devices
5.3. Crating groups
5.4. Creating scenarios
5.5. Connecting YSC unit to local Wi-Fi
5.6. Remote access service
5.7. Setting password
6. Controlling device from computer
7. Demo version