Connecting By Ethernet Cable; Mobile App - Interface Description; Controlling Devices - YOODA SMART CONTROL UNIT Manual

3. First start-up

3.4 Connecting by Ethernet cable

1.Included Ethernet cable should be plugged into back panel of the control unit and to free output slot in working router. If your
router's LAN is set to IP address: 192.168.1.x, then before connecting the ethernet cable, disable wireless connection in your
control unit: Settings >Network connections > Wireless network configuration
3.To return to the default mode in which the control unit provide its own wireless network press briefly the "reset" button on the
back of the unit

4. Mobile app - interface description

Due to the changes introduced in the system functions and various sizes of mobile devices presented screenshots are
only illustrative.
After connecting control unit to router
by Ethernet cable run app and select
"Find SmartControl Unit".
Than choose Wi-Fi network
generated by the router
(not by the Smart Control unit).
App has 5 main tabs:
MY HOME

controlling devices

and group of devices,
SCENARIOS
adding, editing and turning
on created time scenarios,
CHOREOGRAPHY
adding, editing and turning
on created choreography
SETTING
adding and editing devices, adding
and editing groups of devices, changing
control unit settings (work mode, connection
settings, password) and changing language,
YOODA SHOP
Website with Yooda products
After successfully connecting
to the network, control unit
is ready to work.
Status bar informs us on
work mode.
LAN
control unit works in local network,
NET
remote access service, connection to internet,
DEMO
app is in demo mode,