First Start-Up; Initialisation; Downloading App And Changing Language; Connecting To Wi-Fi - YOODA SMART CONTROL UNIT Manual

3. First start-up

3.1 Initialisation

3. First start-up

3.2 Downloading app and changing language

To operate control unit properly dedicated app needs to be downloaded and installed on the device. Using Google
Play or App Store search 'yooda smart control' phrase or use QR code below.
Language of the app can be changed. When app is started for the first time it will automatically set to the language of the
device (or English, if it's unavailable). To change the language (in regular mode or in DEMO mode) go into 'Setting' and then
'Language'.
3. First start-up

3.3 Connecting to Wi-Fi

After connecting control unit and
finished initialization it will automatically
generate own Wi-Fi network named
'SmartControl_SerialNumber'.
Using mobile device (smartphone, tablet etc.)
search and connect to unprotected
SmartControl network.
power
radio
power Wi-Fi
After running the app,
network configuration screen will appear.
Press 'Find Smart Control Unit'
for automatic IP address setting.
1. After unpacking the control unit mount the antenna and connect
the unit to power source. 'Power supply' diode should light up
steady as long as the energy supply is uninterrupted. 'Radio' diode
will be flashing until device initialization is finished.
2. After about 60 seconds, when 'Radio' diode stops flashing,
control unit is ready for work.
After finding control unit
choose 'Connect'.