Remote Access Service - YOODA SMART CONTROL UNIT Manual

www.sukcesgroup.pl
In order to fully explore available functions of YOODA SMART CONTROL UNIT (YSC_UNIT) please take a moment and read this manual before using
the device.
All devices work on 433 MHz frequency.
5. Configuration and work mode

5.6 Remote access service

Remote access service should be activated when automated devices are to be controlled outside from the local Wi-Fi
network. Reaction time of automated devices controlled using remote access, considering usage of staging servers, is
longer than when using local Wi-Fi network.
For remote access to work properly:
1. Smart Control unit needs to be connected to the internet.
2. Current time needs to be set on Smart Control unit.
3. Remote access service function needs to be activated.
Yooda SmartControl
My home
Devices
Devices groups
Network connections
Date, time
Advanced
To activate remote access service
choose 'Advanced' in 'Settings' tab.
Yooda SmartControl
Remote access service
Remote access service state
Service allows connection with Smart Control Unit through Internet. To make it work the unit
must have Internet access, e.g. by the home network.
Turned off
Remote access service requires correct time set on Smart Control Unit.
After entering 'Remote access
service' again test activated function.
YOODA SMART CONTROL UNIT
Yooda SmartControl
LAN
Connection to Smart Control Unit
My scenario Settings YOODA shop
Smart Control Unit IP address
Remote access service
Remote access service state
About YOODA Smart Control Unit
Software version
current
newest
Mobile app version
Run 'Remote access service' option.
Yooda SmartControl
Test remote access service
Cancel
When controlling device is out of reach
of local Wi-Fi network control unit search
screen will be displayed. To connect
control device to Smart Control unit
press 'Connect remotely'.
Advanced settings
Change Smart Control Unit access password
192.168.1.1
turned off
1.0,3/1.0.3
1.0,3/1.0.3
1.2.3
Close
Find Smart Control Unit
Smart Control Unit IP Adress
192 168 1 1
Connect
Connect remotely
Yooda SmartControl
Advanced settings
Remote access service
Service allows connection with Smart Control Unit through Internet. To make it work the unit
must have Internet access, e.g. by the home network.
Turned off
Close
Choose 'Turned on' option to activate
remote access function.
Yooda SmartControl
LAN
My home My scenario Settings YOODA shop
Remote access service
Application is using remote access mode. Smart Control unit configuration is not permitted in this
mode. Comunication is slower than in local mode as well.
Please use button below to quit remote access mode.
Quit remote access mode
When controlling device is again
within reach of local Wi-Fi network it
can be reconnected, by turning it off
using 'Settings' tab.