Bonnet OPTIMUM 700 Builder’s Specifications page 24

- Drill through the ∅ 5 fixation holes of the brackets. Use the upper holes (2 brackets per appliance).
Note: In case of impossibility (due to the presence of technical ducts, a metal strengthener in the
wall...), drill through the lower holes in the template.
- Remove the template.
- Increase the bracket fixation holes to diameter ∅ 8 and, at least, to 65 mm in depth.
- Fix the brackets to the wall. Use HSA-R M 8x75 plugs or equivalent.
- Open the brackets to the maximum by means of the centre screw
- Set the appliances in place on the brackets and lock them.
Warning! The appliances must rest on the bearing beam.
Bracket
Bearing
beam
23
Page
BONNET CIDELCEM GRANDE CUISINE
Siége social:
Rue des Frères Lumière - Z.I Mitry Compans
77292 MITRY MORY Cedex
3BE390582NI – 06/07
Opened bracket
Fixation screw
Opening screw