1. Manuals
  2. Brands
  3. Bonnet Manuals
  4. Cooktop
  5. OPTIMUM 700
  6. Technical instructions

Bonnet OPTIMUM 700 Technical Instructions

Tops and units gas
Hide thumbs Also See for OPTIMUM 700:
Table of Contents

Advertisement

Quick Links

Download this manual
OPTIMUM 700
TOPS AND UNITS
GAS
BUILDER'S SPECIFICATIONS
Part A: Technical characteristics
Part B: Technical instructions for the installer
- WARRANTY -
In order to guarantee this equipment, we recommend that you comply with the
MANUFACTURER'S INSTRUCTIONS in this manual.
However if you can not undertake the required maintenance operations, our installation and
service network is available to provide you with a personalized contract.
- WARNING -
•
The product delivered to you complies with current standards. If any modifications are made
the manufacturer cannot accept any responsibility whatsoever. The manufacturer can not be
held responsible in the event of an incorrect use of the appliance.
•
Read the notice carefully before installation.
•
Keep your manuals.
3BE390835NI

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OPTIMUM 700 and is the answer not in the manual?

Questions and answers

Related Manuals for Bonnet OPTIMUM 700

Summary of Contents for Bonnet OPTIMUM 700

  • Page 1 OPTIMUM 700 TOPS AND UNITS BUILDER’S SPECIFICATIONS Part A: Technical characteristics Part B: Technical instructions for the installer - WARRANTY - In order to guarantee this equipment, we recommend that you comply with the MANUFACTURER’S INSTRUCTIONS in this manual. However if you can not undertake the required maintenance operations, our installation and service network is available to provide you with a personalized contract.

  • Page 2: Table Of Contents

    LIST OF AUTHORISED GASES / PRESSURES AS PER CATEGORIES & COUNTRIES........17 CHANGEOVER FROM A GAS TO ANOTHER ....................18 GAS FLOW RATES AND POWERS ........................20 CHART OF NOZZLES and AIR ADJUSTMENT....................21 BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans F-77292 MITRY MORY Cedex...

  • Page 3: A) Technical Characteristics

    0,00 11,60 0,92 1,23 1,39 1,39 B1O7PR8PG a.c. 0,10 0,40 11,60 700: Ribbed Griddle w. 800 on Cupboard (Gas) 0,92 1,23 1,39 1,39 BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans F-77292 MITRY MORY Cedex...

  • Page 4: Firm Plates

    NOTE: Both the Gas and Pressure for which the appliance is set must be authorised in the country in question. Check this point in the section: Changing the appliance from one gas to another. BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans...

  • Page 5: Location Of The Plates

    3BE390835NI – 01/12 1.2 LOCATION OF THE PLATES The firm plates are fixed on the oven fascia (see the diagrams hereafter). Location of the plates BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans F-77292 MITRY MORY Cedex...

  • Page 6: Installation: Generalities

    Before installation, remove the strapping from the appliance. The individual parts are not bolted down. Remove the protective plastic film from the stainless steel parts before heating. BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans...

  • Page 7: Installation: Putting In Place

    Procedure - Fix the template supplied by two ∅ 5 screws to the wall. Check level. Warning: Check this template is really horizontal. BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans F-77292 MITRY MORY Cedex...
  • Page 8 - Put in place the wall supports under the appliance (2 per appliance). - Adjust appliance alignment in height by means of the jack on the wall supports. Bracket Wall support BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans F-77292 MITRY MORY Cedex...

  • Page 9: Assembly Of Appliances On A 630 High Base

    3.1.2 ASSEMBLY OF APPLIANCES ON A 630 HIGH BASE - Fix the fixation legs of the ready-to-install tops on the base. Fixation legs BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans F-77292 MITRY MORY Cedex...
  • Page 10 - Fix the appliances between themselves at their font in the way of fascia with a HM5 16 screw + 5 flat Ø washer+ 5 nuts. Ø BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans F-77292 MITRY MORY Cedex...

  • Page 11: Cooking Units

    - Fix the lower supporting beam of the appliances against the wall. Warning: Be careful to properly put this beam horizontally. - Fix the template supplied to the wall with two ∅ 5 screws. Check horizontality. BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans...
  • Page 12 - Put the appliances in place on the brackets and lock them. Warning: The appliances must rest on the supporting beam. Bracket Supporting beam BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans F-77292 MITRY MORY Cedex...

  • Page 13: Assembly Of The Appliances On Individual Bases

    - Fix the appliances between themselves at their font in the way of fascia with a HM5 16 screw + 5 flat Ø washer+ 5 nuts. Ø BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans F-77292 MITRY MORY Cedex...

  • Page 14: Assembly Of The Appliances On A Masonry Base

    1) Neutral top on a 200 or 400 technical compartment. 2) Cupboard foreseen for taps and sized 400 with all possibilities of cooking or neutral tops except induction. BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans...
  • Page 15 - Fix the back part (on the end appliances before their definitive installation) on the base with the hex head screw ( ). - Fix the right and left end trimming kits ( ) (2 front screws and 1 back screw). BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans...

  • Page 16: Installation: Connections

    (all metallic structures to the same voltage) by means of a terminal provided for this purpose and located beside the connecting gland. The builder denies all responsibility in the case where the instructions above are not observed. BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans...

  • Page 17: Gas Connnection

    Gas connections must meet the standards in force (DTU 61.1) and are to be carried out only by qualified installers. These connections are made to a male gas part 1/2". Ready-to-install top Cooking unit Gas inlet Gas inlet BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans F-77292 MITRY MORY Cedex...

  • Page 18: Adaptation Of The Appliance From One Gas To Another

    G 31 Netherlands G 25 G 30 28-30 2L3B/P G 31 G 25 2L3P G 31 Norway G 30 28-30 3B/P G 31 BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans F-77292 MITRY MORY Cedex...

  • Page 19: Changeover From A Gas To Another

    3 operations: Change nozzles (See paragraph 5.4) Adjustment of primary air (See paragraph 5.4) Change idle adjusting screw (See paragraph 5.4) BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans F-77292 MITRY MORY Cedex...
  • Page 20 G 30 G 31 None 3B/P *Change of category to be realised only under the responsibility of our Company or our local agent. BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans F-77292 MITRY MORY Cedex...

  • Page 21: Gas Flow Rates And Powers

    *Change of category to be realised only under the responsibility of our Company or our local agent. 5.3 GAS FLOW RATES AND POWERS See paragraph A: TECHNICAL CHARACTERISTICS (Instructions for installation) BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans...

  • Page 22: Chart Of Nozzles And Air Adjustment

    310 335 * Configuration valid only for 50 mbar propane in Austria ** Configuration not valid in Austria *** Configuration valid only in Netherlands. BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans F-77292 MITRY MORY Cedex...
  • Page 23 30 or 37 or 50 * Configuration valid only for 50 mbar propane in Austria ** Configuration not valid in Austria *** Configuration valid only in Netherlands. BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans F-77292 MITRY MORY Cedex...
  • Page 24 *** Configuration valid only in Netherlands. RA: Air adjustment Air adjustment must be carried out based on the “ d “ size specified in the previous tables. BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans F-77292 MITRY MORY Cedex...
  • Page 25 Position 1 RA: Air adjustment Air adjustment is carried out by means of a pin according to the position specified in the previous charts. BONNET GRANDE CUISINE Registered office: Rue des Frères Lumière - Z.I Mitry Compans F-77292 MITRY MORY Cedex...

Table of Contents