1. Manuals
  2. Brands
  3. Bonnet Manuals
  4. Kettle
  5. OPTIMUM 700
  6. Manufacturer's instructions

Bonnet OPTIMUM 700 Manufacturer's Instructions

Boiling kettles gas & electric
Hide thumbs Also See for OPTIMUM 700:
Table of Contents

Advertisement

Quick Links

Download this manual
OPTIMUM 700
BOILING KETTLES
GAS & ELECTRIC
MANUFACTURERS INSTRUCTIONS
Part C: Instructions for use
- WARRANTY -
To ensure the guarantee on this equipment, you should comply with the MANUFACTURER'S
INSTRUCTIONS in this manual.
However if you cannot undertake the required maintenance operations, our installation and service network is
available to provide you with a personalized contract.
- WARNING -
•
The product delivered to you complies with current standards. If any modifications are made the
manufacturer cannot accept any responsibility whatsoever.
The manufacturer cannot be held responsible in the event of inappropriate use of the equipment.
•
This equipment is intended for use by suitably trained professionals.
•
Read all the documentation before user.
•
Keep your documents for future reference.
•
Translation of the original manual
3BE390922NU

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OPTIMUM 700 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Bonnet OPTIMUM 700

Summary of Contents for Bonnet OPTIMUM 700

  • Page 1 OPTIMUM 700 BOILING KETTLES GAS & ELECTRIC MANUFACTURERS INSTRUCTIONS Part C: Instructions for use - WARRANTY - To ensure the guarantee on this equipment, you should comply with the MANUFACTURER’S INSTRUCTIONS in this manual. However if you cannot undertake the required maintenance operations, our installation and service network is available to provide you with a personalized contract.

  • Page 2: Table Of Contents

    THE COMMONEST CAUSES OF CORROSION: ......................... 7 CLEANING STAINLESS STEEL SURFACES ........................8 MAINTENANCE OF THE GAS SYSTEM ..........................8 RECOMMENDED AND FRONT LINE SPARE PARTS ....................8 GUARANTEE ................................9 BONNET GRANDE CUISINE Rue des Frères Lumière - Z.I Mitry Compans 77292 MITRY MORY Cedex...

  • Page 3: Recommendations

    Corresponding graduations of a Boiling kettles 60 litres Maxi level Boiling kettles 60l 530 x ∅ 400 Dimensions of tank (Depth x width x depth) Useful capacity (litres) Maximum capacity (litres) BONNET GRANDE CUISINE Rue des Frères Lumière - Z.I Mitry Compans 77292 MITRY MORY Cedex...

  • Page 4: General

    If the pilot goes out repeat it is set to full or towards low flame. but hold the knob in for longer. BONNET GRANDE CUISINE Rue des Frères Lumière - Z.I Mitry Compans 77292 MITRY MORY Cedex...
  • Page 5 A purge has been introduced so that after the well is filled the pipework drain down. This prevents water dripping onto the worktop or into the well after cooking has started when the water is turned off. BONNET GRANDE CUISINE Rue des Frères Lumière - Z.I Mitry Compans...

  • Page 6: Example Of Capacities And Cooking Times

    NOTE: It is highly recommended to dry the bottom of the tank. Stagnation of water mixed with cleaning agents or chlorine, after a certain time, results in irreversible corrosion of the bottom. BONNET GRANDE CUISINE Rue des Frères Lumière - Z.I Mitry Compans...

  • Page 7: Preventive Maintenance

    - If not switch off and allow to cool for at least 30 minutes before safely changing the valve. Valve Attention: The valve cover should not be unscrewed fully about 4 turns. This will compromise its operation. BONNET GRANDE CUISINE Rue des Frères Lumière - Z.I Mitry Compans 77292 MITRY MORY Cedex...

  • Page 8: Maintenance

    In the case of intensive use, all the cooking equipment (ovens, boiling pans, even utensils) must be selected with a grade of stainless steel specifically adapted to use in such an environment. BONNET GRANDE CUISINE Rue des Frères Lumière - Z.I Mitry Compans...

  • Page 9: Cleaning Stainless Steel Surfaces

    10.2 x 15 diameter 2 mm thick metal-asbestos plastic gasket 318033 Cavity heating element + immersion heater gasket 366461 Draw spring with 30 x 200 diameter stainless steel insert 385051 BONNET GRANDE CUISINE Rue des Frères Lumière - Z.I Mitry Compans 77292 MITRY MORY Cedex...

  • Page 10: Guarantee

    For this reason we advise against connecting appliances until the electrical and gas supplies can be checked and compared with details on the data plate. BONNET GRANDE CUISINE Rue des Frères Lumière - Z.I Mitry Compans 77292 MITRY MORY Cedex...

Table of Contents