Pilous ARG 330 SAF Instruction Manual page 20

CHANGE BLADE
0 9 : 2 0 : 0 3
The screen CHANGE BLADE activates upon pressing the FAILURE Blade-tension sensor. The failure occurs in the event of saw
blade breakage or loosening of the saw blade tensioning star nut.
FAILURES
0 9 : 2 0 : 0 3
FAILURE
SERVICE
0 9 : 2 0 : 0 3
MANUFACTURER:
PILOUS-pásové pily spol. s r.o.
Železná 9
CZ-619 00 Brno
web:
e-mail:
tel:
DISTRIBUTOR:
PILOUS-pásové pily spol. s r.o.
Železná 9
CZ-619 00 Brno
web:
e-mail:
tel:
CHANGE BLADE
0 8 / 1 0 / 2 0 1 6
m/min
65
15
6,5 A
0
m m
FAILURES
0 8 / 1 0 / 2 0 1 6
DATE TIME
SERVICE
0 8 / 1 0 / 2 0 1 6
www.pilous.cz
metal@pilous.cz
+420 543 25 20 10
www.pilous.cz
metal@pilous.cz
+420 543 25 20 10
90
62%
The latest failure always appears on top and is not deleted. In the
case of a new failure the previous failure will move to a line below.
The system stores 200 failures. You can browse through the list
using buttons.
The failures are displayed in colour:
red - current unresolved failure
green - resolved failure stored in the system
The display that informs the user about the machine manufacturer
and distributor - contacts regarding the service in emergency.
The screen is locked - only the manufacturer or the distributor can
edit the data.
FAILURE
Blade-tension
sensor
Move to the next/previous line
Jump to the last/first item in the list