Pilous ARG 330 SAF Instruction Manual page 16

TOUCH SCREEN
Close the arm cover,
unlock TOTAL STOP and
press the yellow
illuminated button
SAFETY
Upon starting the machine with the
is not activated.
Activate the safety relay by pressing the yellow backlit button. When you activate the safety relay, the machine will become
operational and MAIN MENU will appear on the panel.
The yellow screen also appears during the operation of the saw, anytime the machine is stopped using the safety relay - by opening
the arm cover or pressing TOTAL STOP. After the elimination of the cause the machine will become operational upon pressing the
yellow backlit button.
MAIN MENU
MAIN MENU
0 9 : 2 0 : 0 3
On the Main Menu screen you can access all machine functions regarding operation, settings or service. Control the screen by
putting your finger on the area of a particular button.
After you press the TIME box, a screen with data about the operating status of the machine appears (applies to all screens in all
modes).
Upright font - information box (not affected by touch)
Italic (symbol) font - buttons (touch to initiate the function, or jump to a different screen)
Note: Some information boxes or buttons are present on multiple screens. Each of them is described only once in the manual,
because they possess the same function on all screens.
TIME
0 9 : 2 0 : 0 3
DATE
0 8 / 1 0 / 2 0 1 6
HYDRAULIC UNIT
START/STOP
MANUAL MODE
MAIN SWITCH and loading the system, a yellow screen will appear. That means the safety relay
0 8 / 1 0 / 2 0 1 6
SEMI-AUTOMATIC MODE
ARM LIFTING HIGH SETTING H
SAW BLADES
MACHINE SETTINGS
FAILURE SCREEN
SERVICE CONTACT