Pilous ARG 330 SAF Instruction Manual page 17

SEMI-AUTOMATIC MODE
0 9 : 2 0 : 0 3
15
320
m m
21
50
0.0
Active features of the mode
Hydraulics ON
Saw blade upwards
Saw blade downwards
Saw blade ON
HYDRAULIC UNIT
START/STOP
Press the hydraulic unit START/STOP
icon to start or stop the hydraulic unit.
ANGLE - Accessories
Shows the screen angle of the saw blade.
Press the icon in order to perform the
0.0
calibration.
15
Saw blade speed 15-90 m/min
6,5 A
Ammeter - measures the saw band motor load
320 125
m m m m
320 Arm uplift height setting (editable)
125 Current height of the arm
If you set the arm uplift to a higher value in the semi-
automatic mode, the arm will ascend to the required
height after pressing the Enter button.
If you set the arm uplift to a lower value in the semi-
automatic mode, the arm will remain in the same position
after pressing the Enter button and will ascend to the
required height after performing the cut.
S.A. MODE
0 8 / 1 0 / 2 0 1 6
m/min
65
6,5 A
125
m m
65 m/min
90
62%
90
62%
WORKPIECE COUNTER
21
50
Vice
open
If the vice is open, pressing the START
button in the S.A. MODE executes the cycle
and after its completion the vice remains open.
If the vice is closed, pressing the START
button in the S.A. mode executes the cycle
and after its completion the vice remains closed.
Min.1
Esc
+/-
Esc
Correct the set value
Enter
ARM UPLIFT HEIGHT H SETTING
Press the icon in order to display a table for
optimal setting of the height of the cut log.
Number of completed workpieces
Set number of workpieces
Vice
closed
By pressing this button, you can only open
the vice. This button is only in machines
with full-uplift vice: ARG 380, 500 plus
S.A.F.
Go to main menu, or a level higher.
Max.2
7 8 9
4 5 6
1 2 3
0 Enter
Window cancelation
Confirm the set value
1
Clr