Pilous ARG 330 SAF Instruction Manual page 18

MANUAL MODE
0 9 : 2 0 : 0 3
0.0
START/STOP uplift or descent of the arm
The ARM STROKE END SWITCH
must be in position 0.
Saw blade upwards
STOP
Saw blade downwards
Press the vice icon (contact pressure)
to change the vice status
to OPEN/CLOSED.
Vice
open
MACHINE SETUP
MACHINE SETUP
0 9 : 2 0 : 0 3
LANGUAGE
ANGLE
COUNTER
OPERATING HOURS
0 HOU.
MANUAL MODE
0 8 / 1 0 / 2 0 1 6
m/min
65
15
6,5 A
0
m m
Vice
closed
0 8 / 1 0 / 2 0 1 6
COOLANT/
OIL MIST
PRESSURE
SWITCH
TIME+
DATE
SYSTEM
After switching on the hydraulic power unit, the START button
lights up green. This indicates the machine is on. Blue boxes next
to icons indicate reaching the particular extreme position
90
(uplift/descent of the arm or switching the vice pressure switch).
If you initiate any function that is logically preceded by a different
function (that has not been activated yet), the button of the
preceding function will start flashing to indicate error.
62%
LANGUAGE - switch to the screen, selection of several languages.
ANGLE - enables displaying of the set angles on the display
(accessories)
COUNTER - counts the number of cut workpieces in the current
series
OPERATING HOURS - displays the time of operation of the
hydraulic unit (regular changes of oil)
BUNDLE CUTTING HVP - HVP accessories actuation
COOLANT/OIL MIST - you can switch between cooling by coolant
(red cross) or oil mist (accessories) (green tick)
PRESSURE SWITCH - switch to the screen with vice pressure
switch settings
TIME + DATE - switch to the screen with system date and time
settings
SYSTEM - switch to the system settings screen with converters,
servo motors, PLC settings. The screen is locked - only the
manufacturer or the distributor can edit the data.
SCREW CONVEYOR OF CHIPS - switch to a service screen for
maintenance and cleaning of the machine