Changing The Diamonds - Husqvarna PG280 Operator's Manual

Resin bond diamonds
Redi Lock resin attachment adaptor
Full set - outer row
Half set - outer row
Selecting the correct resin bond diamond
configuration for your application
Applications
Polishing terrazzo/stone tiles
Resurfacing terrazzo/stone
tiles
Surface polishing of concrete
floors - Hard concrete
Surface polishing of concrete
floors - Medium concrete
Surface polishing of concrete
floors - Soft concrete
WARNING! CP1200 and P1100 must not
!
under any circumstances be used with a
Redi lock adapter.
OPERATING
Full set - Half set -
outer row outer row
X
X
X
X
X

Changing the diamonds

Shut down the machine and disconnect the power plug.
Have a set of gloves ready, as diamond tools can get very
hot.
• Put the machine into service position.
• Pull back on handle to lift grinding head off the ground.
• Lay machine back on the ground.
• Put on gloves.
• Use a hammer to remove the diamond segments.
• Affix new diamond segments on the grinding disc.
• Once new diamond segments have been attached,
reverse procedure to lower machine to ground.
–
English 15