Speed Symbols; Esi[Tronic] 2.0; Systemsoft Bea-Pc; Operation - Bosch FSA 740 Original Instructions Manual

en

28 | FSA 740 |

5.3.5

Speed symbols

During an engine speed measurement, the FSA system
software automatically selects the best speed source.
The selected speed sensor is displayed on the status
bar of the screen.
Terminal 1 or TD/TN
Clip-on sensor
Clip-on sensor
Battery harmonic content
Amps clamp
5.4 ESI[tronic] 2.0
With a KTS module, ESI[tronic] 2.0 can perform a
control unit diagnosis.
i
Before you can work with ESI[tronic] 2.0 you first
need to install and license the software.
5.5

SystemSoft BEA-PC

With BEA 055 / BEA 070 and BEA-PC system software,
FSA 740 can be extended to become an exhaust gas
analyzer.
i
The current version of SystemSoft BEA-PC is
included in the scope of delivery as a DVD.
Installation is described in the enclosed operating
instructions for BEA 055 and BEA 070.
5.6

Operation

!
Only carry BEA 070 in an upright position. If the
BEA 070 is tilted during transportation, condensate
may escape and damage the measurement chamber.
!
At an ambient temperature of >35 °C, no more than
20 pages can be printed in a one hour period.
1 689 989 400 | 2019-04-01
6.

Maintenance

6.1

Cleaning

6.1.1 FSA 740
Only clean trolley and housing with soft workshop
rags and neutral cleaning agents. Do not use abrasive
cleaning agents and coarse workshop rags.
6.1.2

Data storage device

Clean DVD with a cleaning kit or wipe the silver side of
the data storage device carefully with a soft, lint-free
cotton cloth. Never use paper towels as these could
cause scratches.
6.1.3

DVD drive

Clean the DVD drive regularly with a cleaning
data carrier for the DVD drive. The appropriate
cleaning disks are available from most computer or
entertainment electronics shops.
Robert Bosch GmbH