Page 1
LABORATORY POWER SUPPLY JT-RD6006 / JT-RD6012 1. GENERAL INFORMATION Dear customer, thank you very much for choosing our product. In the following, we will introduce you to what to observe while starting up and using this product. Should you encounter any unexpected problems during use, please do not hesitate to contact us.
When the system temperature is higher than 80 °C, the output will be shut down because of OTP. The RTC does use CR1220 batteries. Communication interface is a special interface, please don’t connect to other modules or cables. www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn...
Output voltage preset value Current output current Output current preset value Overvoltage protection value Current output power Overcurrent protection value Current data group Battery-related information Constant voltage/Constant current status Battery charging indication Protection status indication www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn...
The overcurrent protection switches off the output of the unit as soon as the current set at OCP is exceeded at the output. The overvoltage protection switches off the out- put of the device as soon as the voltage at the output exceeds the voltage set on OVP. www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn...
Page 7
Measure is the refresh rate of read back voltage and current on the main page, you can set it to low, middle and high. Press rotary encoder to return and it will be auto- matically saved. www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn...
Page 8
You can press 'SHIFT' + '0' to enter the system setting menu, then press the right but- ton three times to enter the system information menu as shown above. You can view the SN number, firmware version and system temperature here. www.joy-it.net Pascalstr. 8 47506 Neukirchen-Vluyn...
Simac GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn, Germany Possibility of return in your area: We will send you a parcel stamp with which you can return the device to us free of charge. Please contact us by e-mail at Service@joy-it.net or by telephone. Information on packaging: If you do not have suitable packaging material or do not wish to use your own, please contact us and we will send you suitable packaging.
Need help?
Do you have a question about the JT-RD6006 and is the answer not in the manual?
Questions and answers