IBM PCI Cryptographic Coprocessor Installation And Using Manual page 10

Handling
2
PCI Cryptographic Coprocessor Installation and Using Guide
While installing the coprocessor, be aware that:
v The coprocessor is always powered by the batteries, even when it
is not installed in the system.
v The battery power is necessary to keep the coprocessor
operational.
v The loss of battery power or a voltage drop triggers a Tamper
Event and permanently renders the coprocessor inoperable.
v Any short on the battery power distribution circuits causes a
voltage drop and a Tamper Event.
While handling the coprocessor, observe the following precautions:
v Do not lay the coprocessor on or cause the coprocessor to come in
contact with any conductive surface.
v Do not touch the coprocessor circuits with metal or conductive
tools.
v Use static-protective measures at all times when handling the
coprocessor.