IBM PCI Cryptographic Coprocessor Installation And Using Manual page 20

__ 3. Perform an NFS mount of the lppsource directory by typing the following:
__ 4. Perform a preview of the files to be installed on the nodes by typing the following
__ 5. Install the device driver by typing the following at the system prompt:
12
PCI Cryptographic Coprocessor Installation and Using Guide
dsh mount <controlwks>:
/spdata/sys1/install/<lppsource_name>/lppsource /mnt
<controlwks> is the name of the Control Workstation recognized by the nodes.
<lppsource_name> is the name you recorded earlier in "Checking System
Prerequisites" on page 7.
at the system prompt:
dsh "installp -p -acqXd /mnt device driver 2>&1" | more
device driver is the fileset that must be installed for the adapter. The list includes:
v devices.pci.14109f00
dsh "installp -acqXd /mnt device driver 2>&1" | more
device driver is defined in the previous step.
After the device driver is installed on the node, contact your service provider to
have the adapter installed.