Table of Contents
Advertisement
Cleaning the Probe
Remove the nose guard.
O-ring grooves
Use your finger to apply
a light layer of silicone-
based lubricant around
the O-ring grooves.
1-970-498-1500
Use a lint-free cloth to
dry the probe.
Place the O-rings on the
sensor. Apply another
thin layer of lubricant to
the O-rings and grooves.
Pull the used RDO cap
off of the sensor, without
twisting.
Align the flat edge inside
the RDO cap with the flat
edge and metal contacts
on the probe. Slide the
cap in place.
31
Remove the existing
O-rings from the sensor.
Thread the nose guard
onto the probe.
www.in-situ.com
Advertisement
Table of Contents
