Further Information - Panasonic F-VXL40M Operating Instructions Manual

Further information

Generating environment of nanoe™
●
nanoe™ is generated using the air in the room and hence,
depending on the temperature and humidity, nanoe™ may not
be generated.
●
Conditions for generations
Surrounding temperature: About 5 °C to 35 °C (dew-point
Relative humidity: About 30 % to 85 %
■
nanoe™
The nanoe™, generated from the most advanced nanotechnology, is a kind of a nano-sized ion particle
coated with water particles.
With nanoe™ technology, the effect of sterilization *
mold bacteria *
beautiful, moisturized skin.
<Adhesive bacteria> Effect after operating for 8 hours in a 23 m
Effect after operating for 8 hours in a 23 m
Effect after operating for 2 hours in a 23 m
The deodorizing effect differs depending on the surrounding environment (temperature / humidity), operation time, or type of odor / textile.
*1 <Adhering bacteria>
●Testing trustee: Japan Food Research
Laboratories
●Test method: Suspend bacteria in the test
chamber of 23 m
the bacteria count adhered to a
cloth.
●Inhibiting method: Emitting nanoe™
●Target: bacteria that was ingrained in
standard cloth
●Test outcome: inhibited 99 % and above in 8
hours [No. 13044083003-01].
Each test carried out on only
one type of bacteria.
Functions of the ion sterilization unit )anti-fungus agent containing)
Keeps the inside of the tray clean.
Sterilization Testing trustee: Japan Food Research Laboratories
Sterilization method: Contact with ion sterilization unit.
[No. 15059465001-0101]
Anti-fungus Testing trustee: BOKEN QUALITY EVALUATION INSTITUTE
Anti-fungus method: Install the anti-fungus assembly to the tray.
[No. 09006504-1]
26
About "nanoe™"
temperature: more than about 2 °C)
About nanoe™ technology
and deodorization *
3 4
area.
3
area.
3
*2 ●Testing organization: Panasonic Corporation
●Test method: Measure allergic substances
and measure
3
●Inhibiting method: Emitting nanoe™
●Target: adhered allergic substance of pollen
●Test outcome: inhibited 88 % and above in 8
*3 ●Testing trustee: Japan Food Research
●Test method: Confirm fungi adhered to a cloth
●Inhibiting method: Emitting nanoe™
●Target: adhered fungi
●Test outcome: Confirm the effect in 8 hours.
Test method: Verify with the standard agar plate culture method using standard method agar.
Target: Water in tray with ion sterilization unit deployed
Test performed using two types of microorganism.
●
When nanoe™ is generated, small amount of
ozone will be released. However, the quantity
will be at the usual level in forest or natural
environment, and not harmful to human
beings.
, inhibiting allergic substance (pollen) *
1
can be achieved. Furthermore, it creates an atmosphere for
area.
3
The effect refers to the results achieved in a test area, and
does not indicate the effect achieved during actual use.
Analysis Center
adhered to a cloth with ELISA
method in the test chamber of
23 m .
3
hours. [BAA33-130402-F01]
Laboratories
in the test chamber of 23 m
[No. 13044083002-01]
Test method: Verify the method to prevent mold bacteria (Halo method).
Target: Humidifying filter in the tray
A small amount of ozone is generated.
*4 ●Testing organization: Panasonic Corporation
●Test method: Conduct verification using six
grades odor intensity
measurement method in the
test chamber of 23 m
●Deodorizing method: Emitting nanoe™
●Target: adhered cigarette odor
●Test outcome: odor intensity drops 1.2
grades within 2 hours.
[BAA33-130125-D01]
.
3
Test outcome: 99% or more suppression in 24 hours
Test outcome: Confirm that inhibited.
, inhibiting
2
Analysis Center
.
3