Table of Contents
Advertisement
Operating methods
Each press of the
button will switch
the air volume
setting.
(The indicator is lit.)
To cancel
Press
until the indicator
turns off.
Note
When the "Water supply" indicator is blinking, there is no water in the tank, so fill the tank with water.
If there is water in the tank, there will be slight humidification and water in the tank will decrease, even if
"Humidification" is set to OFF. If even slight humidification is not required, discard the water in the tank and
tray.
20
Set humidification
Cleaning the air while humidifying
Operation when the "Air volume" is set to [Auto].
Operation under other conditions are *1 *2.
Beep
Maintaining a comfortable
Med
humidity level
Beep
When dry air is a concern, or
Hi
to humidify the air quickly
Long
beep
Humidification is not required (It operates in clean
OFF
air mode.)
Beep
Using humidification at low
Lo
humidity levels
*1 If "Air volume" is set to [Lo], [Med] or [Hi], or if the product is operating with the
"Timer" set to [8 hours (sleep)], each press of
[Med] and OFF.
[Med] and OFF.
Humidification
Set humidity (general level)
about 50 %
about 60 %
about 40 %
switches between
switches between
Advertisement
Table of Contents
