Door Bell Buttons - Auerswald TFS-Dialog 400 Advanced Information

Functions, applications, concepts

Door bell buttons

Door bell buttons
The sensors on a horizontal row form a button panel and are used
individually or grouped as a door bell button. If there are multiple door bell
buttons, these are counted from top to bottom.
The device can be set individually to between 1 and 4 door bell buttons.
Each door bell button is assigned a destination number which is called for
the set maximal call duration when the door bell button is pressed.
The buttons can also be assigned switching functions. For example, the
light can be switched on or off, the door can be opened or an additional bell
can be activated by pressing a door bell button.
All functions are set individually for each door bell button.
When a door bell button is pressed, the signal sound is emitted as per the
configuration and the following processes are initiated:
• The telephone configured for the door bell button rings for the set
maximal call duration.
• The assigned switching functions are executed.
Notes: If a second door bell button is pressed before the receiver is
picked up, hang up the device and repeat the process described above.
If the same door bell button is pressed, the process is continued and not
restarted.
If multiple door bell buttons are pressed at the same time, the process
for the last key pressed is performed.
When detecting a voice, the device automatically establishes a voice
connection. If necessary, the voice connection can also be established
actively (Door conversation operation (page
12
50)).
TFS-Dialog 400 - Advanced Information V01 10/2017