Code Lock - Auerswald TFS-Dialog 400 Advanced Information

Functions, applications, concepts

Code lock

Code lock
Various functions (e.g. opening the door, turning on the light, opening other
doors) can be performed via a code lock.
A maximum of 10 code locks can be configured for each device. Up to three
functions are available for each code lock.
Note: The code lock is switched off in factory settings.
Configuration procedure:
• Enter name and code.
– Via the TFS Set app (in menu Code lock)
• Set the switching functions.
– Via the TFS Set app (in menu Code lock)
Procedure for entering the code lock PIN:
1. Press the key below the label panel.
2. Using the buttons on the device, enter the programmed
and confirm with #.
Notes: The star key (*) is assigned the cancel function while the device
is being configured and in code lock mode.
10
TFS-Dialog 400 - Advanced Information V01 10/2017
code lock PIN