Table of Contents
Advertisement
Parking brake
The parking brakes are only effective when
the selection lever drive-/push mode is set
to drive mode on both drives. They disen-
gage automatically when the wheelchair
starts off.
The parking brakes are manually disen-
gaged by switching the selection lever
drive-/push mode on both drives to push
mode.
Locking the brakes
It should not be possible to push the elec-
tric wheelchair forward when the brakes
are engaged.
To engage the brakes swivel the selection
lever drive-/push mode on both sides as far
as possible into drive mode [1].
☞ Activation of the selection lever is in-
tended for an accompanying person.
Releasing the brakes
To loosen the brakes swivel the selection le-
ver drive-/push mode on both sides down
as far as possible into push mode [2].
☞ Activation of the selection lever is in-
tended for an accompanying person.
1
2
17
Advertisement
Table of Contents
