AXIS P5655-E PTZ Network Camera
Additional settings
1. Go to Settings > System > Detectors.
2. Turn on shock detection, and set a value for the shock sensitivity.
Create a rule:
1. Go to Settings > System > Events and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under Device status, select Shock detected.
4. Click + to add a second condition.
5. In the list of conditions, under Scheduled and recurring, select Scheduled event.
6. In the list of schedules, select After hours .
7. In the list of actions, under Recordings, select Record video while the rule is active.
8. Select a Camera.
9. Set the prebuffer time to 5 seconds.
10. Set the postbuffer time to 60 seconds.
11. Select where to save the recordings.
12. Click Save.
Add audio
Add audio to your recording
Turn on audio:
1. Go to Settings > Audio and turn on Allow audio.
Edit the stream profile which is used for the recording:
2. Go to Settings > Stream and click Stream profiles.
3. Select the stream profile and click Audio.
4. Select the checkbox and select Include.
5. Click Save.
6. Click Close.
13