Applications; Add Audio - Axis P9106-V User Manual

Hide thumbs Also See for P9106-V:

Table of Contents

AXIS P9106-V Network Camera

Additional settings

7. Set the postbuffer time to 60 seconds.

8. In the list of storage options, select SD card.

9. Click Save.

Applications

AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications

for Axis products. To find out more about available applications, downloads, trials and licenses, go to axis.com/applications.

To find the user manuals for Axis applications, go to axis.com.

Note

• Several applications can run at the same time but some applications might not be compatible with each other. Certain

combinations of applications might require too much processing power or memory resources when run in parallel. Verify

that the applications work together before deployment.

Add audio capability to your product

With the AXIS T61 Audio and I/O Interface products, you can add audio capability to your product. Use the setup in, for example,

interview rooms. You can place the Axis network video product on the wall or ceiling to give good visual coverage, and the

AXIS T61 Audio and I/O Interface on or above the interview table.

Axis network video device

AXIS T61 Audio and I/O Interface

PoE switch

To add audio capability to your Axis network video device, connect the AXIS T61 Audio and I/O Interface between your device and

the PoE switch which provides power.

1. Connect the Axis network video device (1) and the AXIS T61 Audio and I/O Interface (2) with a PoE cable.

Interview room with AXIS T61 Series setup.

Table of Contents