Safety - Tech Controllers ST-976 User Manual

S
AFETY
Before using the device for the first time the user should read the following regulations
carefully. Not obeying the rules included in this manual may lead to personal injuries or controller damage.
The user's manual should be stored in a safe place for further reference. In order to avoid accidents and
errors it should be ensured that every person using the device has familiarized themselves with the principle
of operation as well as security functions of the controller. If the device is to be sold or put in a different
place, make sure that the user's manual is there with the device so that any potential user has access to
essential information about the device.
The manufacturer does not accept responsibility for any injuries or damage resulting from negligence;
therefore, users are obliged to take the necessary safety measures listed in this manual to protect their lives
and property.
WARNING

High voltage! Make sure the regulator is disconnected from the mains before performing any
activities involving the power supply (plugging cables, installing the device etc.)

The device should be installed by a qualified electrician.

Before starting the controller, the user shoud measure earthing resistance of the electric
motors as well as the insulation resistance of the cables.

The regulator should not be operated by children.
WARNING

The device may be damaged if struck by a lightning. Make sure the plug is disconnected from
the power supply during storm.

Any use other than specified by the manufacturer is forbidden.

Before and during the heating season, the controller should be checked for condition of its
cables. The user should also check if the controller is properly mounted and clean it if dusty
or dirty.
Changes in the merchandise described in the manual may have been introduced subsequent to its completion
on February 13th 2018. The manufacturer retains the right to introduce changes to the structure. The
illustrations may include additional equipment. Print technology may result in differences in colours shown.
We are committed to protecting the environment. Manufacturing electronic
devices imposes an obligation of providing for environmentally safe disposal of
used electronic components and devices. Hence, we have been entered into a
register kept by the Inspection For Environmental Protection. The crossed‐out bin
symbol on a product means that the product may not be disposed of to household
waste containers. Recycling of wastes helps to protect the environment. The user
is obliged to transfer their used equipment to a collection point where all electric
and electronic components will be recycled.
5