Functional Description - Omron STC-HD213 Series Product Specifications And User's Manual

7.5

Functional Description

DSP: Shutter/GainTab
The settings for exposing and gain are changeable. These can be change individual DSP User Preset.
ALC
1) ALC mode
Selects enable or disable for ALC mode.
When selecting "Enable", please set "Exposure time control", "Gain control" and below control settings for ALC
mode.
2) ALC target level
Sets the target brightness of image that is maintaining by auto exposing and/or auto gain operation.
3) ALC integration-frame number
Sets the number of frames to ALC process. (ALC processing speed)
4) ALC rapid control frame number
Sets the number of frames for rapid ALC processing when power on camera or changes displaying mode.
(ALC processing speed when power on camera or changes displaying mode)
STC-HD213DV / STC-HD213DV-CS / STC-HD213SDI / STC-HD213SDI-CS /
STC-HD213DVN / STC-HD213DVN-CS / STC-HD213SDIN / STC-HD213SDIN-CS
Product Specifications and User's Guide
No. 20S071-01
36/94