Advertisement
Bluetooth
The D375 Snom-phone has a built-in wireless module that is compatible with Bluetooth v4.0 + EDR, class 2, headsets.
Turn on the headset to make it detectable. You may need to put some headsets into pairing mode to make them detecta-
ble.
Open the phone's Settings menu -> 1 Preferences -> 7 Bluetooth (Fig. 1). When there are no paired or connected devices,
the setting will say "No devices available" (Fig. 2).
Press the context-sensitive function key underneath the symbol of the magnifying glass to initiate discovery mode. The
display now says "Discovering. Please wait..." (Fig. 3). If devices are detected, they will be listed on the display in the List of
discovered devices, one device per line (Fig. 4). Each line contains a symbol for the type of device, the make/model of the
device, and its MAC address. Currently only the type Audio/Video is supported, indicated by the headset symbol.
If no device is found or the headset you want to pair is not among the listed ones, make sure that the headset is detecta-
ble, i.e., turned on and within range, then press the function key underneath the magnifying glass again to repeat the
search.
When more than one device is listed, select one of them with the up and down arrows on the navigation key. When the
headset you wish to pair is highlighted (Fig. 4), put the headset into pairing mode and press the OK key on the phone. Plea-
se, refer to the headset's manual for further information on putting the headset into pairing mode.
SNOM D375
Advertisement
