Accessories; Service Parts Kits - Siemens 353 User Manual

UM353-1B

13.2 ACCESSORIES

The following two tables list the accessories currently available.
ACCESSORY
i|config Graphical
Configuration Utility
Transmitter Power Supply
Adapter Bezel
Blank Filler Panel
Loop Identification Card
Permanent Instrument Tag
Display Assembly Remote
Mounting Kit
Communications Cable,
MMJ11 to MMJ11
Adapter, DB25 to MMJ11
Adapter, DB9 to MMJ11
Faceplate Labels

13.3 SERVICE PARTS KITS

Exploded view drawings of the Siemens 353 appear in Section 1 Introduction and Section 10 Maintenance.
SERVICE PART DESCRIPTION
MultiMediaCard
- FIRMWARE UPDATE KITS -
Controller upgrade Utility and Controller Firmware for Models 352P, 353, 353R,
354 and IPAC
Download file fw400.zip, the file/firmware revision at the time this manual was
prepared, or order a firmware CD
April 2012
PART NUMBER DESCRIPTION
iCONFIG-Vn.nn Windows® 98, NT, 2000, and XP compatible software for
PC-based controller configuration and creation of a function
block diagram. Transfer configuration to and from
controller via Modbus or Ethernet.
Vn.nn - the latest software version will be supplied.
Includes:
16353-61 Cable - see description below
16353-63 Adapter - see description below
15124-1 Acopian Model B24G210M, 24 Vdc, 2.0A
15738-123 A panel cutout adapter for mounting a controller in a 3"x 6"
panel cutout.
15738-168 Enhances control room appearance by covering a panel
cutout intended for future mounting of a controller.
----- Custom printed loop identification for flip-down access
door. Specify up to 5 lines with 24 characters per line.
----- Stainless steel tag permanently attached to the controller
case. One line with up to 24 characters can be specified.
16353-54 For remote panel mounting of a Display Assembly. Includes:
Flange Assembly
Mounting Clips and Screws
Display (Ribbon) Cable, 48 inches (1219 mm) long
Installation Instruction
Does not include the Display Assembly.
16353-61 Connects MMJ11 on adapter (connected to a personal
computer's serial port) to MMJ11 on a Display Assembly.
Select one of the following adapters.
16353-62 Adapts personal computer serial port to above
Communications Cable.
16353-63
----- Discontinued.
Model Designation and Specifications
PART NO.
TGX:16353-304
15939-71V4.00
Contact Siemens
for current
version.
13-3