Siemens 353 User Manual page 246

SR353-15
UPGRADE CONSIDERATIONS AND MATERIALS
None. Note that this firmware release is for use with design level "B" Model 353 controllers only.
INSTALLING VERSION 4.03
Refer to Software Release memo SR15939-71-6 for a brief list of needed hardware and the firmware installation
steps.
CUSTOMER/PRODUCT SUPPORT
For support and the location of your local Siemens representative, refer to the table below for the URL of the
Process Instrumentation (PI) portion of the Siemens public Internet site. Once at the site, click Support in the right
column and then Product Support. Next select the type of support desired: sales, technical (see the table below),
documentation, or software.
Online Support Request
Technical Support
Customer Service & Returns
Public Internet Site
Technical Publications
in PDF
All product designations may be trademarks or product names of Siemens Industry, Inc. or other supplier companies whose use by third parties
for their own purposes could violate the rights of the owners.
Siemens Industry, Inc assumes no liability for errors or omissions in this document or for the application and use of information included in this
document. The information herein is subject to change without notice.
Procedures in this document have been reviewed for compliance with applicable approval agency requirements and are considered sound
practice. Neither Siemens Industry, Inc. nor these agencies are responsible for product uses not included in the approval certification(s) or for
repairs or modifications made by the user.
© Copyright 2012, Siemens Industry, Inc. All rights reserved.
http://www.siemens.com/automation/support-request
1-800-333-7421; 8 a.m. to 4:45 p.m. eastern time, Monday through Friday (except
holidays)
1-800-365-8766 (warranty and non-warranty)
http://www.usa.siemens.com/pi
Click the above link to go to the Siemens Internet site and then click Process
Instrumentation. In the column to the right, click Support > Manuals. In the
column to the left, select the product line (e.g. Pressure or Temperature or
Controllers) to open navigation and search panes.
2