Table of Contents
Advertisement
MR500 View
4.3.5 Alarm Clock Feature
The MR500 View has an Alarm Clock, which can be set from this menu entry.
1
'd' indicates that the alarm is set to repeat on a daily basis.
1 2
Indicates the time of the alarm. This is always in 24 hr format.
Press and Hold SELECT to change the Alarm Clock time.
Press REVERT to turn the Alarm Clock ON or OFF.
Press TOTAL to change the hour.
Press EXTRAS to change the minutes.
Press MODE to turn the daily function ON or OFF.
Release SELECT to save the changes.
If you set the alarm clock to ON, the alarm will sound at the time you have set.
The alarm sounds for a maximum of 30 seconds. You can cancel the alarm while it is
sounding by pressing any of the five buttons once. Their normal function is disabled for this
one depression (the meter could be in any mode).
If the daily function is not activated then, once the alarm has sounded, it is automatically
disabled, so the next time you look at the setting in the Info Menu, it will be disabled (display
shows OFF).
Note that, if the alarm clock setting menu is being viewed when the alarm time is reached, the
alarm will only give one bleep.
1
1%00
d
2
alrm
28
Advertisement
Table of Contents
Need help?
Do you have a question about the MR500 View and is the answer not in the manual?
Questions and answers