The Totals / Conditional Access Systems; Basic System; Log On With Totals Pin - Cygnus MR500 View User Manual

MR500 View

6 The Totals / Conditional Access Systems

This section describes the two systems possible on the MR500 View. You can choose the
system you want in the Totals Config menu (Section 4.8).

6.1 Basic System

The basic system is designed for use either where only one person uses the meter or where
there is no need to log on or off the meter. When using the basic system:
Ÿ There is no need to log on or off the meter.
Ÿ Two sets of totals are provided, resettable and permanent banks.
Ÿ Log On/Off will be absent from the Info Menu.

6.2 Log On With Totals PIN

This system provides you with a simple way to control the use of your meter and/or taxi.
In order to use the meter, you must first 'Log On' to it using either the 'Totals PIN' or the 'User
Totals PIN'.
These methods are provided to give you the choice of how to manage the use of your meter /
vehicle.
Examples of ways to use the system are:
Ÿ Use the built-in Totals PIN yourself to log on and off. If you leave the meter logged off
when not in use, it can prevent the accidental addition of extra totals. For example, it can
prevent your children from adding extra journeys to your totals.
Ÿ If you set the User Totals PIN, you can use a more easily remembered number to log on
and off as above.
Ÿ You can set the User Total PIN to any value you like. This can then be given to another
user of the meter for one or more shifts and then changed afterwards.
48